If all is well, enter 33768 as the "new" adaptation value and slect "test." Note that the displayed air intake volume changes, usually to about 370 mg/stroke. (If it does not show this, you are either on the wrong screen, or you have an older ECU that differs slightly - see next paragraph.) ![]() Note that the display will show a default adaptation value of 32768 and shows approximately 250 +/-20 mg/stroke of air intake volume. Give the accelerator pedal a quick "pat" to ensure that the EGR remains turned on for the next minute while you perform the following steps. Next, select "adaptation" then go to adaptation block 3. With a warm engine (full operating temp) and running at idle in neutral with all accessories turned off, connect VAG COM (VCDS) and start the software, select engine control module.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |